Door trim

[Swann, Benjamin R. (BSWANN)]

Some of mine warped, and I had to use stainless steel screwws to hold them
on.

Clean well;  Use adhesive caulk/ double stick rubber tape.  Drill carefully
- 1/16" bit, and #8 3/4 screws.  2 on each end - one at top, one at bottom.

This definately won't come off.

Downside - poking holes in the car.

Ben
'85 4Kcsq

[I have a rear door trim piece that's bent and the trailing edge keeps 
lifting off.  I've tried several adhesives, but it keeps detaching at 
highway speeds.    I understand from postings here in the past that the 
adhesive used to mount these trim pieces make it impossible to detach them 
from a wreck and reinstall them without the chromed surface looking
terrible.]