oil pressure test with mechanical gauge: ?

[kbogach]

Thank you. You just remind me that I have J.W. fuel injection pressuer kit,
I went to basement and found that I can use that gauge if I find 10x1 pipe
male fitting to NPT or hose.  McMaster is the next stop.

Konstantin.

----- Original Message -----
From: <cobram at juno.com>
To: <kbogach at home.com>
Cc: <quattro at audifans.com>
Sent: Tuesday, March 27, 2001 3:18 PM
Subject: Re: oil pressure test with mechanical gauge: ?


> You are correct, it's basically matching up the fitting.  Last time I
> measured oil pressure was on a VW Jetta (notorious clusters), I borrowed
> a friends el-cheapo JC Whitney gauge kit, and I was surprised to find it
> came with the correct adapter,  all you have to do is remove the oil
> pressure switch and match up the treads with the adapter (sometimes
> there's more than one, use the one with easiest access) and screw in the
> gauge.
>
> BCNU,
> Cobram at Juno.Com
> http://www.geocities.com/cobramsri/index.html
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.