4kq PS filter removal/fluid replacement
Jpinkowish at aol.com
Jpinkowish at aol.com
Fri May 11 14:12:55 EDT 2001
In a message dated 5/11/01 12:16:48 PM EDT, "Erik R" writes:
> I need to replace the PS fluid (black) and filter in my 864kq. It looks
> really easy: just unscrew the wide cover and pull it out. Nope. Doesn't
> unscrew. It doesn't unscrew with a merican oil wrench. Well, after 16
years
> that's not much of a shock.
>
> So, I heat the cap up with 1500w heatgun. Nope. I chip hit the knurl with
a
> hammer and a flathead. Nope.
>
> Given that I can actually see and access this part, and it's not
technically
>
> broken (a new problem for this Audi): Any ideas on how to unscrew this?
Before procedingand possibly cracking the reservoir, go to the boneyard and
get a replacement. Pull and plug your hoses. Use a can to catch the
drippings from the reservoir. Pitch the old reservoir, install the new,
reattach the hoses, and flush your PS system.
> BTW The pentosin (in a blue container with a white cap) I have is clear
> yellow, like brake fluid. Is this the right stuff? The bentley says use
> ATF>>>?
ATF is the proper fluid to use.
HTH.
Jan Pinkowish
'85 4kq
Bristol, CT
More information about the quattro
mailing list