wheel studs

[John Corbishley]

Tim:

I'm using these on my UrQ.  If the 4kq has 14mm x 1.5mm pitch lug bolts,
then these will work.  I can't say for sure, but I had the sense that all of
the 1980's and 1990's Audi used the 14mm.  It is easy to establish, just
measure the OD of the lug nut (forgive me for stating the obvious).  If they
are 14mm, then I'm 99% certain that they are 1.5mm pitch (ie metric fine).

I bought mine from AWETuning, (215) 753-8203

You can also enquire directly with H&R themselves.  Talk to Steve at
888-827-8881 or (360) 738-8881.  He will be able to refer you to a dealer in
your area.

The part number for the 40mm is 1454005 and they are called QUICK-SAFE
studs.

John Corbs
----- Original Message -----
From: "Penasack, Tim" <Tim.Penasack at storagenetworks.com>
To: <jcorbs at gtresort.com>
Sent: Friday, May 11, 2001 3:12 PM
Subject: wheel studs


> John-
>
> What car are using these for? I am wondering if these will work on my 4kq
> rally car? Also who did you plan on buying these from?
>
> -Tim
>
> "The are TUV approved, screw right into your existing hub, and have a =
> shoulder for positive location.  I got some in over the weekend and they =
> appear to be very well made.  They are available in 40, 50 and 60mm =
> lengths.  This measurement represents the threaded area to the outside =
> of the shoulder.  The 40mm length should be fine for most of our =
> applications."
> Tim Penasack
> Senior Manager, Strategic Alliances
> StorageNetworks
> (781) 622-6459
> (603) 321-5117 mobile
>
>
>