wheel studs

[John Corbishley]

I believe that they are the same.  Ask the brains trust for confirmation.

John Corbs
----- Original Message -----
From: "Penasack, Tim" <Tim.Penasack at storagenetworks.com>
To: <one at humanspeakers.com>; "John Corbishley" <jcorbs at gtresort.com>
Cc: "'urquattro'" <urq at audifans.com>; "Quattro List" <quattro at audifans.com>
Sent: Friday, May 11, 2001 3:27 PM
Subject: RE: wheel studs


> What about the 5k's - I am running 5k hubs (5k front strut assemblies and
> URQ rear)
>
> -----Original Message-----
> From: Huw Powell [mailto:audi at mediaone.net]
> Sent: Friday, May 11, 2001 6:27 PM
> To: John Corbishley
> Cc: Penasack, Tim; 'urquattro'; Quattro List
> Subject: Re: wheel studs
>
>
>
> > I'm using these on my UrQ.  If the 4kq has 14mm x 1.5mm pitch lug bolts,
> > then these will work.  I can't say for sure, but I had the sense that
all
> of
> > the 1980's and 1990's Audi used the 14mm.
>
> (I think the 4 x 100 cars use 12mm lug bolts)
>
> > It is easy to establish, just
> > measure the OD of the lug nut (forgive me for stating the obvious).  If
> they
> > are 14mm, then I'm 99% certain that they are 1.5mm pitch (ie metric
fine).
> >
> > I bought mine from AWETuning, (215) 753-8203
>
> --
> Huw Powell
>
> http://www.humanspeakers.com/audi/
>
> http://www.humanthoughts.org/
>