wheel studs

[Kneale Brownson]

The 4Kq in my driveway takes the same 17mm socket as the 5Kq, 200q20v and V8.


At 03:35 PM 05/11/2001 -0400, John Corbishley wrote:

>I believe that they are the same.  Ask the brains trust for confirmation.
>
>John Corbs
>----- Original Message -----
>From: "Penasack, Tim" <Tim.Penasack at storagenetworks.com>
>To: <one at humanspeakers.com>; "John Corbishley" <jcorbs at gtresort.com>
>Cc: "'urquattro'" <urq at audifans.com>; "Quattro List" <quattro at audifans.com>
>Sent: Friday, May 11, 2001 3:27 PM
>Subject: RE: wheel studs
>
>
> > What about the 5k's - I am running 5k hubs (5k front strut assemblies and
> > URQ rear)
> >
> > -----Original Message-----
> > From: Huw Powell [mailto:audi at mediaone.net]
> > Sent: Friday, May 11, 2001 6:27 PM
> > To: John Corbishley
> > Cc: Penasack, Tim; 'urquattro'; Quattro List
> > Subject: Re: wheel studs
> >
> >
> >
> > > I'm using these on my UrQ.  If the 4kq has 14mm x 1.5mm pitch lug bolts,
> > > then these will work.  I can't say for sure, but I had the sense that
>all
> > of
> > > the 1980's and 1990's Audi used the 14mm.
> >
> > (I think the 4 x 100 cars use 12mm lug bolts)
> >
> > > It is easy to establish, just
> > > measure the OD of the lug nut (forgive me for stating the obvious).  If
> > they
> > > are 14mm, then I'm 99% certain that they are 1.5mm pitch (ie metric
>fine).
> > >
> > > I bought mine from AWETuning, (215) 753-8203
> >
> > --
> > Huw Powell
> >
> > http://www.humanspeakers.com/audi/
> >
> > http://www.humanthoughts.org/
> >
>
>