Ignition Switch or Starter????

[Ti Kan]

Iain Atkinson writes:
> got a prob that ineed to share, my Coupe Q (4000q)won't turn over not even a
> click from the solenoid on the starter. Car can be push started and starts
> fine. Is it the ignition switch not doing it's job or the starters
> completely screwed?????

Assuming your battery and wiring is good, have someone measure the
voltage at the starter solenoid while you turn the ignition switch to the
'start' position (trans in neutral and e-brake applied for safety).
That should be telltale.

-Ti
01 S4 2.7 biturbo quattro
84 5000S 2.1 turbo
80 4000 2.0
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///