Heater not working right on 5KCSQ

[Nate Stuart]

Sounds like the motor brushes in your blower assembly are worn out, or
stuck. Search the archives for blower motor brush replacement (or just
blower motor replacement) and that should get you what you need.

HTH!
-Nate
'89 90tq
www.newtsplace.com/90tq

----- Original Message -----
From: "Adam Jansen" <aedan1 at hotmail.com>
Subject: Heater not working right on 5KCSQ


> The heater on my 5KCSQ is flaking out on me.
> The blower wont come on unless I take a hard turn (right seems to work
> better than left) and then the blow is very weak even if the fan is turned
> to high.
>
> When the blower is functioning (with its weak blow)and I take another hard
> turn, I can hear the blower motor push out air at the expected high level,
> but that returns to the pathetic blow once the car comes out of the high G
> turn...
>
> I just messed with the ignition switch (and by virtue the instrument panel
> and headlight switch) if that matters.
>
> What is wrong? Lose wire? Blocked Hose?
>
> Email your suggestions to
> Aedan1 at hotmail.com
>
> Thanks
> Adam
> Olympia, WA
> 87 5KCSQ