1.8 crank pulley alignment ?

[Calvin Krug]

I am in the middle of replacing the timing belt in my '87 4000, and I
neglected to notice the alignment of the v-belt pulley on the
crankshaft before I removed it.  I need to know which direction the
notch on the edge goes in relation to the bump on the t-belt
sprocket, or TDC, whichever you know.  Apparently, this notch must be
aligned with the intermediate shaft sprocket when I put the belt back
on.  Not sure why that has to be timed, but I don't want to find out
the hard way.

Calvin K.