AC programmer problems

[Howarth1 at aol.com]

I recently bought a 1990 100 with 52,000 indicated.  So it has been doing a lot of sitting in its life.  When I first put a battery in it and got it running the Ac programmer was working fine but after about 4-5 hours of run time the programmer started blinking and the blower motor does not run.  The compressor is kicking on and off and the cooling fan runs slowly all the time.  (Default fail mode?)  Programmer inputs have no effect.  If I pull the fuse to the programmer the fan and compressor stop.  Is my programmer dead or has my blower motor quit and my programmer smart enough to know it?  Looking for trouble shooting help, archives, and a Bently manual if anyone has one for sale.

Also of note, my fuse box index shows an "AC relay" in position 22 but the space is empty.  Is the relay missing or is this for Euro spec cars only?

Any help is appreciated, I would like to get this barely used 100 back to factory spec.

Thanks,

Richard Howarth, Howarth1 at aol.com