Interior Temp Sensor

[Kim Johnson]

Mike,

Bet you a Dollar to a Donut that the brushes are shot in your blower motor.

Kim Johnson
----- Original Message ----- 
From: "Michael Williams" <campvw at home.com>
To: <quattro at audifans.com>
Sent: Sunday, October 07, 2001 17:55
Subject: Interior Temp Sensor


> Hi everyone,
> My 89 100's fan blower has quit. Actually not 100%. It will kick on just
> a little and then die off. In running through the climate control
> diagnostics, it shows an open on the roof temp sensor. I've undone the
> access panel on the roof and sure enough the temp sensor is unplugged.
> The problem is that I can't find where to plug it back in to. My only
> thought is that it should connect to a wire as opposed to anything
> related to the roof motor mechanism that I can see. Does anyone know if
> this wire should be coming in from the left side or right side as I face
> front?? I've looked and felt around and can't seem to find it. If I know
> what area to look in then I can concentrate there. I appreciate all your
> help.
> Thanks again
> Mike Williams
> 
>