Replacing Flywheel

[dawson-md]

The flywheel on my 5Ktq only fit one way. One bolt was offset slightly so
that the pattern would line up in only one position. If yours fits anywhere
around the bolt pattern then try this. Turn the engine over until the
distributor lines up at #1 and the cam timing marks on the front of the
engine are in their TDC position. Now line up the pin on the flywheel with
the pickup on the bellhousing. The bolt holes should now be aligned
correctly.
Mike
'83 UrQ
'84 4Kq
'87 5Ktq
'77 Ferrari 308 GT4