Clutch pedal issues, 4kq

[Christopher Flanner]

I had the same problem on my 4kq.  The problem WAS NOT the clutch slave
and/or master cylinder.  I replaced them both and the clutch still didn't
release until the pedal was near the floor and I had to use my toe to get
the pedal to fully return.

What ended up fixing the problem was extending the adjusting rod between the
master cylinder and the clutch pedal clevis.  I think you need a 10mm and a
11mm open end wrench and a rubber neck to see under the dashboard.

I think the clutch master cylinder had been replaced by the previous owner
but the rod was never adjusted.

Could be the problem?!

Chris

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp