what is causing leak in steering rack? Anybody rebuilt it?

[Kneale Brownson]

--
Did you clean out the area where the hose connects to the rack BEFORE you
took the old hose off?  Sounds like something got into the rack and is
plugging part of it up enough to interfere with operation.  It's possible
something got into it from the new hose too if the assembler wasn't careful.


At 02:19 PM 10/30/2001 -0500, Konstantin Bogach wrote:

>Hi listers.
>
>What is the main reason for steering rack leak?
>How difficult to rebuild it by myself?  Do I need special tools to do
>that? Does it make sense to do it by myself rather to send it to Jorgen?
>
>I have wierd problem:
>There is no leak in the rack (small leak in high pressure hose though).
>After changing high pressure hose from pump to bomb (rebuild by
>Aeroequip dealer) and bleeding the system power assist was lost.  There
>is little assist when turning to left and no assist when turning to
>right.  Brakes have power assist.  Pump gives 2100 psi max - in spec.
>
>I already removed the rack. Now I am staring at it and scratching head:
>what to do? A tech from Jorgen was very nice talking to me 10min but he
>said that sympthoms are not common and it is hard to imagine the cause.
>
>I don't know whether or when the rack was changed. Let's imagine that I
>found a piece of rubber stuck in the valve which caused the problme and
>I fixed it: does it make sense to rebuild the rack if it does not have a
>leak but is out of car?
>
>Thank you.
>
>Konstantin Bogach
>200tq '89
>200tqa '89
--