Water pump replacement and idler pulley removal

[Brian O']

for the serp belt ?? you take the center plastic cover
off and there is either a allen head bolt or a torx
head bolt.
 
you have to remove the crank pulley to take out the 2
10mm bolts for the plastic cover.
 
i hope you also bought a tensioner and idler for the
timing belt also, and a thermostat. do you have the 2
tools you need to do this ?? a crank holder and a cam
holder, can be done without, but only people that have
done them before !!! and you need a cam sprockt puller
to break the cam sprockets loose !!!
                                       brian o'
93 90 cs
90 80
89 80 ( almost together )
88 944 turbo s ( for sale )


--- Tim Sexton <5kcstq at codenet.net> wrote:
> Hello All,
>     Can someone with a Bently tell me how to remove
> the lower drivers
> side idler pulley on my AAH 12v V6 in my 90?  It
> came loose/broke, this
> a.m.  and I can't figure out how to remove it and
> the plastic lower
> timing belt shroud behind the crank pulley.  I
> bought a new water pump
> and timing belt which I hope to replace while I have
> it all apart.
> Thanks for you help.
> Tim Sexton
> 
> 94 90cs quattro sport
> 87 5kcstq
> 86 4kcsq
> 


__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com