Bypass install

[Robert Deis]

On Fri, 7 Sep 2001, Jay Rabe wrote:

> engine is sucking.  (I could see it reading wrong if you blew the air
> straight down on the airflow plate, or an air leak wich could make it go
> rich/lean depending on where the leak is.)  The bypass just loops the
> metered air around until the motor sucks air again.

Right.  If you plumbed it in too close to the airflow meter, then you
might disturb the flow, or if you plumbed it in pointed upstream, you
might disturb the flow-- but hook it close to the compressor inlet and I'd
be very surprised if you had any trouble.

-- 
------------------------------------------------------------------------------
  Rob Deis                  "Let the people know beforehand what the law
  MiB3347                      is and what they are to expect."
  rdeis at io.com                              -- 18th Congress, Rec. 75