eurolight harness for a 4kq

[Michael Pshenishny]

When I did the eurolights on my 5ktq, I used a Bud Industries NEMA 4
box.  I got it from
https://www.hlkassoc.com as they had the size I wanted in stock and had
the best price.
You will probably also want some cable glands so all the wiring in/out
doesn't compromise the security of the box.  (You'll need to drill holes
for your specific sized glands obviously)  There are lots of different
sized boxes available, I used 1324-C
which is 6.73 x 4.76 x 2.17 to hold 4 Bosch 30A relays (Bosch PN 0 332
019 150)
and it fit very nicely next to the radiator.  Only other suggestion is
that you figure out
what gauge wire and how many are going to go into/out of the box to be
sure to get the correct gland size.  I think Bud also makes mounting
brackets for the different boxes, but I made my own.
Good luck,
Mike Pshenishny
'87 5ktq

"Richard J. Andrews" wrote:
Now, the next
> question, anyone know of a good relay box?
> i want everything nice and neat and would like a watertight box that i
> could put near the core support or somewhere along those lines.
> rich
> '86 4kq