eurolight harness for a 4kq

[Michael Pshenishny]

When I put the eurolights on my 5ktq I used a Nema 4 box from Bud
Industries.  I ordered it from: http://www.hlkassoc.com/ as they had the
best price and had the size box I wanted in stock.  The other thing you
would want to get at the cable glands to make sure all the wiring in/out
doesn't comprimise the "waterproof-ness".  (You will have to drill holes
for the cable glands obviously)  The size I used was 6.73 x 4.76 x 2.17
(PN 1324-C), which fit 4 Bosch 30A relays (Bosch PN 0 332 019 150)
inside and mounted it next to the radiator.  I believe that Bud also
makes brackets to mount the different boxes, but I chose to make my
own.  One suggestion is to figure out what gauge wire and how many will
be going into & out of the box, to get the proper size cable gland(s)
after you figure out what size box you need.  You can also get the CAD
drawings of the boxes at the Bud Industries homepage if you need to
figure out the internal screw sizing, more specific dimensions, etc.
Overall it made for a very nice, neat, and efficient install.

Good luck
Mike Pshenishny
'87 5ktq

"Richard J. Andrews" wrote:
> Now, the next
> question, anyone know of a good relay box?
> i want everything nice and neat and would like a watertight box that i
> could put near the core support or somewhere along those lines.
>
> rich
> '86 4kq