200q20v gearbox 016?

[Mihnea Cotet]

At 17:28 18/04/2002 -0400, Martin Pajak wrote:



>They will not work on Coupe q shafts BTDT.
>You might have to just change the flanges.

I hope they work, but as all PNs start with 016it should work...

> > Yup, I know that, this is why I'll move on to 16" rims with the
> > corresponding tire size and I'll swap the 200's speedo assembly in the
> > coupe to have everything right.
>
>You do not need to go that far.
>Speedo will work just fine as it's the speedo that matches the tires not the
>tranny.
Yup, I know that but....

>However you will need to do some fabrication to slip the speedo cable into
>the tranny.

Exactly!

>One, change the speedo cable ring from the original 016 into the 20v.
>Cut threads for the speedo cable sensor to screw into the 20v tranny
>(original sensor is held in by clip and O-ring).

Yup, that's what I meant, and to avoid all this hassle, I might just swap
the tranny with the speedo sensor attached and swap the speedo into the
cq's dash...though I'm not sure it fits...
Anyone has a better idea? Like using a sensor from a 90q and the related
speedo? Could it work in the 20v's tranny?

Thanks for your help Martin anyway!

Mihnea