200q20v gearbox 016?

[Martin Pajak]

> Yup, I saw that... I hope it's okay... I also noticed a difference in PNs
> on the front diff driveshaft flanges, someting like 100 (mm) and 108 for
> the 20v... hopefully the flanges are swappable as well, if not
> I'll use the
> 200's beefier inner CV joints.

They will not work on Coupe q shafts BTDT.
You might have to just change the flanges.

> Yup, I know that, this is why I'll move on to 16" rims with the
> corresponding tire size and I'll swap the 200's speedo assembly in the
> coupe to have everything right.

You do not need to go that far.
Speedo will work just fine as it's the speedo that matches the tires not the
tranny.
However you will need to do some fabrication to slip the speedo cable into
the tranny.
One, change the speedo cable ring from the original 016 into the 20v.
Cut threads for the speedo cable sensor to screw into the 20v tranny
(original sensor is held in by clip and O-ring).

Cheers
Martin Pajak

http://www.quattro.ca

1983 Audi Ur-quattro (269,000 km) Canadian spec. winter car
1985 Audi Ur-quattro (146,000 km) Euro spec. import ;o)