108mm to 100mm conversion....

[TM]

You'll need VW QSW hubs, but I don't know if that would
work w/ G60 calipers, because they were not used on any VWs
using that bolt pattern, and the offsets might be different.

Taka

-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com] On
Behalf Of Jim Green
Sent: Monday, August 05, 2002 11:06 PM
To: luke wiegandt
Cc: Quattro list
Subject: Re: 108mm to 100mm conversion....



--- luke wiegandt <maytagasm at sympatico.ca> wrote:
> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> hiya guys... was wondering what is involved
> in converting my type 89 quattro from 108mm 4 bolt
> to the standard vw/honda 100mm 4 bolt...
> i want to do the G60 brake upgrade anyways...
> so what do i need besides G60 calipers, G60 rotors?
> i think i need bearings too.... i bet ill need new
> bolts
> too... anyone done this?

I've never heard of anyone going this route, the most
common upgrade is to the 5x112 bolt pattern of the
urq.  Should be plenty of stuff in the archives.

Later,

=====
Jim Green
'89 90tq 034EFI, Haltech IG5
http://www.geocities.com/jeg1976/car_home.html

__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better http://health.yahoo.com