best way to remove exhaust manifold without breaking studs.
Bob
bob at audisport.com
Thu Aug 15 23:49:56 EDT 2002
*This message was transferred with a trial version of CommuniGate(tm) Pro*
.
Soak them in kroil first, they'll almost definately come out with no problems.
https://secure.cnchost.com/kanolabs.com/kanopnlu.htm#anchor173855
Bob
"Richard J. Andrews" wrote:
> *This message was transferred with a trial version of CommuniGate(tm) Pro*
> you're kidding, right?
> luck i guess.
> seriously though, i would remove the intake first for more access.
> but be prepared to pull the head if you are not experienced in stud removal
> i had the whole motor out of my car so i loaded it up and took it to the
> machine shop.
> cost was around $55 well worth it IMO this was new studs installed and old
> ones removed.
>
> someone else on the list said that you can weld onto the studs and get them
> out.
>
> HTH!
> rich
> '86 4kq
>
> >I finally got all my parts together and was going to get started on my
> >exhaust conversion. The question I have is what is the best way to remove
> >the exhaust manifold without breaking the exhaust studs?
> >
> >Thanks
> >
> >Nate
More information about the quattro
mailing list