heater core R&R 200tq

[Pat]

Ron

To replace the heater core you do have to take the center
section apart.  There are probably 6 to ten screws (don't
know for sure) to take out.  You will need a very long skinny
scewdriver to reach down into the holes to get them out.
Putting the halves back together takes some time.  Best to do
by lowering one onto the other.

Hope this helps

Pat Korach
Kirkland, WA




Ron Wainwright wrote:

>   Listers,
>
>   The inside of the car's been smellin like coolant
> and the window has that filmy look to it so it's
> heater core time
>  now I've replaced a couple of blower motors so gettin
> to that point is easy but
>  after lookin at the arcives and Scott Mockerys web
> site (which is'nt that much help) it saies that I have
> to take the whole box assembly out is that true or can
> I do it with the box in the car?
>  Pluse I don't have any idea how to start to take the
> center section of the center vent out from the inside
> not that difficult to do in the 5ksq like the 5k the
> tubing from the box to the center vent has to taken
> apart to slide the box out.
>  Anyone have a set of Bentley's for the 200 F.S
> Let me know.
> Thanks
> Ron
> 87 5ksq
> 90 200tqa
>
> __________________________________________________
> Do You Yahoo!?
> Great stuff seeking new owners in Yahoo! Auctions!
> http://auctions.yahoo.com