heater core R&R 200tq

[james accordino]

Thanks for catching that.  I did forget the long
screwdriver.  I bought a 12" #2 Phillips  to reach the
ones in the center.  I forgot to say to make SURE you
get all of them.  The box is caulked together and if
you miss a screw, you'll break the box. (Ask me how I
know)

Jim Accordino

--- Pat <tm2 at zipcon.net> wrote:
> Ron
>
> To replace the heater core you do have to take the
> center
> section apart.  There are probably 6 to ten screws
> (don't
> know for sure) to take out.  You will need a very
> long skinny
> scewdriver to reach down into the holes to get them
> out.
> Putting the halves back together takes some time.
> Best to do
> by lowering one onto the other.
>
> Hope this helps
>
> Pat Korach
> Kirkland, WA
>
>
>
>
> Ron Wainwright wrote:
>
> >   Listers,
> >
> >   The inside of the car's been smellin like
> coolant
> > and the window has that filmy look to it so it's
> > heater core time
> >  now I've replaced a couple of blower motors so
> gettin
> > to that point is easy but
> >  after lookin at the arcives and Scott Mockerys
> web
> > site (which is'nt that much help) it saies that I
> have
> > to take the whole box assembly out is that true or
> can
> > I do it with the box in the car?
> >  Pluse I don't have any idea how to start to take
> the
> > center section of the center vent out from the
> inside
> > not that difficult to do in the 5ksq like the 5k
> the
> > tubing from the box to the center vent has to
> taken
> > apart to slide the box out.
> >  Anyone have a set of Bentley's for the 200 F.S
> > Let me know.
> > Thanks
> > Ron
> > 87 5ksq
> > 90 200tqa
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Great stuff seeking new owners in Yahoo! Auctions!
> > http://auctions.yahoo.com
>
>
>


__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com