re. Turbo convertors type 85

[Michael Gough]

>Oiling will need to be adapted, you can
> drill and tap the bottom of the block for the oil return, and pressurized
> oil can be tapped off the oil filter housing quite easily.  Granted, the MC
> bottom end makes these adaptations easier beause it already has the
> provisions for the oil/water.

Easy anyway! Just unbolt the oil filter mount from an MC motor! It includes
the oil feed, and oil cooler in and out lines. Bolt this onto you block
(it's a bolt on) and now you have turbo feed, and lines for the oil cooler.
The block is already drilled and tapped for the return flange, you just have
to drill the return hole.
Mike