Clutch setup for NG 2.3l going into 4KQ & 200Flywheel Assembly in 5KTQ???

[Nate Stuart]

Ben Swann wrote:
> Question of the day.
>
> As the 5kcstqa is already beginning to slip with current power mods,
> reather than replacing with the original setup, I would like to use the
> 200TQ  clutch setup ( from Chris Semple at Force 5)  in the 5ktq, instead
> of putting it into the 4000Q with NG engine.
>
> I am obtaining a NG/90Q lightened flywheel instead to put into the 4000Q.
>
> Will the 80/90Q clutch disk and pressure plate work with the 4000Q
> transmission?  I wasn't sure if the splines are different in the 90Q, or if
> there is a break in years that I need to be aware of.  What clutch kit
> should I specify?

Nope, the 01A clutch (for the 80/90q) is a different beast than the one
specc'ed  for the 016 lockers on the 4kq's. You will need/want to get,
uh, a 5ktq clutch... The 5ktq has a 240mm disc, as opposed to the 228mm
of the 4k/80/90q's...

HTH!
-Nate
'89 90tq (new coilovers/shocks ordered today for her!)
www.newtsplace.com/90tq