e-brake question

[james accordino]

I don't see why not.  Just pack a little more grease
in and drive it down flush with the casting, not into
the full depth of the counterbore.  Nothing will be
forcing it down as the cam is going to bottom on it's
bore.  The seals I got were just run-of-the-mill
single lip oil/grease seals.  About $2-3 ea., but
they're working fine so far.  Oh, and sorry about the
wrong size.  There are so many seal and bearing sizes
and I'm trying to remember them all.

Jim Accordino

--- Konstantin Bogach <kbogach at comcast.net> wrote:
> EPM(www.epm.com) sells them for $9 each, 12 in a
> pack, 1 pack minimum.
> This is double lip, 16x24x07mm.  Not that cheap.  I
> thought about buying
> it, use/keep 4 and have the rest for other listers
> who needs it.
> Tomorrow I will try local bearing dealers. By the
> way, EPM has 16x24x04
> cheaper and 4 in a pack. Will it work?
>
> Konstantin Bogach.


__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com