10vt low end power...

[Jay Rabe]

If you want even more power down low from the 10vt advance the cam a tooth.
Top end is even worse than normal like this but the cam actually comes on
(normally comes on @ 3000rpm) when your k26 makes boost.  If you have a k24
your making boost but not really using it like you could.  If you want top
end retard it a tooth and keep the k26.
Try advancing the cam a tooth, you may not even want the k24 after this.

Jay

_________________________________________________________________
Join the world=92s largest e-mail service with MSN Hotmail.
http://www.hotmail.com