Help!!! 5KCSQ wont start over after clutch replacement

[Adam Jansen]

--
[ Picked text/plain from multipart/alternative ]
OK, after 30 hours doing an R&R on my clutch (first time on an Audi -- 87 5=
KCSQ) I was all ready to take it for a spin and see how I did, only it wont=
 start...The engine turns over and gas comes squirting out of the filter wh=
en I cracked the banjo to make sure it is getting fuel (I am going to check=
 for spark once I find my multimeter)...

Two known issues from the swap - the vaccum housing for the central diff ha=
s a broken nipple so the green stripe hose line isn't connected, and the O2=
 sensor was swapped out with the new one (generic 3 wire) mounted in and wi=
res spliced and twisted together until I can get to Radio Shack to get nice=
 connectors... would either of those two cause this?

Anything else I might have upset or need to reset?

Any suggestions? Things to check??


ARGHHHHH!
Adam
Olympia, WA
87 5KCSQ 240,000 miles and holding