10v 90q calipers on a 20v & history of warping

[WAUFX at aol.com]

In a message dated 7/10/02 9:35:42 PM Eastern Daylight Time,
chris at force5auto.com writes:

> Why downgrade the system it came with? If it's a cost issue, I'll swap you
>  for the rotors on my 90q20v, rather than see you fit smaller brakes.


Chris-

Thanks for your offer. I've been investigating this posibility, and the 20v
and 10v 90s take the same rotor, 256 x 22 mm. The only difference is that the
offset is different for the 20v. The offset, to my knowledge, is how far the
rotor is from the wheel, no?

Wouldn't this mean that the brakes are equal in terms of braking power and
that a switch to 10 calipers wouldn't hurt? Or does it mean that a switch to
10v calipers wouldn't be possible without changing the hubs/struts as well?

Hmm...

Megan