Mocal Oil Cooler Adapter, What Size?

[passat TS]

[ Converted text/html to text/plain ]

I'm going to buy a Mocal adapter to add an oil cooler to a NF engine.

What is the correct size? 18mm, 20mm or 22mm

TIA,

Carlos.
>From: "Bill Bennett"
>To: , ,
>Subject: RE: [urq] rear Konis too springy
>Date: Sun, 21 Jul 2002 19:09:36 -0700
>
>Gary, turn them clockwise, that is what I have on my car, I cranked mine
>all the way to the stiff stop, please note, they are not leaking the
>improvement was minimal; the only reason I attempted adjusting them was
>my new Bilsteins were incorrect, wheeeee! I get to do the shock job
>twice :-( Bill
>
>-----Original Message-----
>From: urq-admin at audifans.com [mailto:urq-admin at audifans.com] On Behalf
>Of GMBCHEF at aol.com
>Sent: Sunday, July 21, 2002 5:13 PM
>To: urq at audifans.com; quattro at audifans.com
>Subject: [urq] rear Konis too springy
>
>--
>[ Picked text/plain from multipart/alternative ]
> I need to re adjust my rear Koni yellows on the urq. I want them to
>rebound
>slower. Do turn them in or out? Right now they are 1.5 turns out. (
>counter
>clockwise). I believe that's half way.
>Gary
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection:
>http://www.audifans.com/mailman/listinfo/urq
>
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq

---------------------------------------------------------------------------=
---
Join the world=92s largest e-mail service with MSN Hotmail. Click Here[1]

=3D=3D=3DReferences:=3D=3D=3D
  1. http://g.msn.com/1HM1ENUS/c157??PI=3D44364