re. Assistance required!

[Ben Swann]

Check to make sure your distributor is not out of its window.  The MC/MAC11
setup is picky about that - did you check codes - that will likely tell.

Ben - just went through this somewhat.

[I finished the MC conversion on my 90q. Well I thought I did. I went to
sta=
rt the car and it has a miss. ..snip...
s later, I got good at fishing and waisting time (Idon't have a lot of
it).=
 I got it out and proceded. After that it still has a miss but almost
wants=
 to run, It stalls though. Sounds as though it's on 3 cyls. not sure. But
a=
fter the last try, I have no power at all. I turn the ignition and nothing
=
no lights nothing. I came right in after washing up and sat down at the
com=
puter. The ignition parts are not new. Almost new, 2 years old. but the
car=
 ran great before the swap. The plugs are new though. If any one can point
=
me in "a" direction as I'm tapped out at the moment, it would be swell.
Tha=
nks, Brandon]