I've got a wire loose

[Marc Swanson]

> If the fan doesn't run with those connections jumpered, then the relay for
> the after-run system is probably bad.  That is, assuming that the leads are
> the correct ones, which it sounds like they are. My after-run relay was not
> working either.  I think it was about $20-$30 to replace (it's a fairly
> large relay with a timer), and now it runs just fine.  The relay is under
> the dashboard, in the auxiliary relay board in front of your knees.  Don't
> remember the relay number, but according to Huw's relay page
> (www.humanspeakers.com/audi/relays.htm) it should be p/n 443 955 532 A or C


Just to double check though, make sure you cycle the ignition on/off then
retest.  If your ignition is off for too long the relay will not turn on the
fan even if you jump those connections.


-Marc-
87 4ktq
88 90q