RS2 Turbos

[JShadzi at aol.com]

Yes, I agree, my point was that since it still says "K24" on the cold side
plate, it would be an easy mistake to make.

Javad

<< Both incorrect.  The RS2 is a "modified" k26.  The hot side housing is
 actually an old k26 partnumber from early 5kt.  The hot side wheel is RS2
 spec, the housing milled to take the different wheel config.  The center
 bearing and shaft are standard issue k26 parts bin stuff, the center bearing
 can be interchanged with any Water Jacketed K26 center bearing.  The cold
 side housings has the k24 stampings on it, but the wheel is a different part
 number (common KKK parts bin) to accomodate the larger shaft.

 The elusive 7200 Comp uses one size larger cold side wheel, and one can go
 one step larger than the 7200comp if so desired.  BTDT
  >>