FS: porsche 993 rear calipers for anyone interested...

[Mihnea Cotet]

At 12:06 8/03/2002 -0500, Martin Pajak wrote:
>I know that the 944 turbo front calipers will bolt onto 5kt strut.
>These look like they have the same kind of anchring system as the 944 t
>caliper (non S).
> >From what I have been told you need to machine the stock rotors for the
>calipers to work.
>Don't know which part to machine but I bet it becomes clear once you try to
>bolt it all up.
>
>Wheel fitment might be an issue as well.

I was the one with the information about Porsche rear calipers.
I know for a fact that the rear RS2 calipers (which are probably the same
as the front 944t ones) bolt right up to the 5k struts and some 80/90 (but
dunno for sure which american model nor which model years). They share the
same caliper mounting bolt pattern of 95mm and they can use the G60 front
rotor (276x25mm) that you'll have to machine to 270mm OD for the caliper to
be able to "sit" over the rotor...Apparently 5mm spacers would be required
for the caliper to fit within a 6x15in Ronal wheel but I can't say for sure
if it's not more.

HTH,


Mihnea