HELP ASAP! (4kq oil lines)

[JShadzi at aol.com]

Ok, in the pic you have the plastic nozzle facing the firewall, it needs to
be rotated 180 degrees and inserted into the Y hose coming off the IM for the
ISV.  The other part is your after run switch, it goes under a few of the
nuts on the valve cover.

Javad

<< Look at the horizontal arrowed rubber fitting (best seen in pic2).
 Where does the long, thin rubber end go (it's pointed up right now)?  It
 can be rotated 360 degrees.  This end is part of the rubber fitting that
 plugs into the oil return line, into the valve case, some other oil
 line, and also holds the idle stabilizer (I think that's what it is).  I
 don't see what, if anything, it attaches to.

 Look at the vertical arrowed item.  I found this buried under a bunch of
 things.  It's some kind of electrical part that looks like it should
 mount to something (possibly to be grounded).  In pic1 you see the
 bottom and in pic2 you see the top. >>