ECUs and LEDs

[Joel Lenorovitz]

Au contraire, Huw.  I have the eurolights with the ellipsoid (projector beam style)
lens so the lamp/reflector/lens assembly for that is completely isolated from the
rest of the enclosure.  Furthermore, the citylight (maybe this is a misleading term)
in the corner has its own bulb socket and reflector, which is separate from the main
'headlight' part of the unit, though everything is housed behind one continuous
piece of glass.  If I can find a way to run the turn signal wiring in there and
secure an amber bulb inside I should be in business.  This should give both forward
and side indications of my turning intentions with a stock exterior appearance.
I'll try to post pics when I find a solution.

Joel

--- Huw Powell <human747 at attbi.com> wrote:
>
> > Lastly, I just got some eurolights from Blau that I'm eager to get in.  The one
> > problem is that the 'citylights' replace the turn signals that were there.  My
> best
> > thought is to try to mount an amber turn signal bulb in the citylight housing to
> > regain the use of my turn signals with a minimal amount of rewiring.
>
> that will be awful... your headlight will mask your turn signal when
> they are on.
>
> a fender mounted repeater is a nice way to go:
>
> http://www.humanspeakers.com/audi/lighting-90-pix1.htm
>
> bottom picture shows TT side markers, they were cheap, get the harness
> for them too - it comes with a really long pair of wires.
>
> http://www.humanspeakers.com/audi/lighting-90-pix5.htm
>
> bottom picture shows them lit up.  I have them wired as "markerflash"
> lights so they are always on wiht theheadlights, flash to signal either
> way.
>
> --
> Huw Powell
>
> http://www.humanspeakers.com/audi/
>
> http://www.humanthoughts.org/


__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
http://mail.yahoo.com/