[urq] Re: 10 vT EM? K24 is good for 278 HP

[james accordino]

Larger shaft on caged needle bearings with about 100
psi of oil pressure?

Jim Accordino

--- QSHIPQ at aol.com wrote:
> --
> [ Picked text/plain from multipart/alternative ]
> Good memory Erik:
> Let me clarify, what I did was a bit different than
> the k24 sport routine.  I
> went after a really big cold side wheel, like one
> that was never designed to
> hang from a k24 pencil lead thick shaft.  I snapped
> the shaft in 2 pieces.
> Ok that was too big.
>
> That said, you can go a more conservative route and
> use the slightly larger
> k24 "sport" concept and have most acceptable
> reliability and performance
> levels in the low 300hp range.  FYI, Audisport was
> known to use the k24 turbo
> up to 360hp in the rally cars.  Not sure how they
> did it, but that was my
> goal wrt the above.  It didn't work for me.
>
> YMMV
>
> Scott Justusson


__________________________________________________
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com