[V8] V8 s6 wheels
David Head
v8q at bellsouth.net
Wed May 8 15:49:00 EDT 2002
Yup...
You can look over what the UFO looks like at Chris Miller's web site, or try
this visual:
Take a large metal bowl and sit it upside down on concrete. Then take a
sledgehammer and bash it in dead center so it creates a dent in the middle.
Your rim will bolt to the dent in the middle. You have to worry about the
machining of your rim where it bolts up (outer edge), and the spokes too.
To finish off the UFO design, weld a rotor ring to the outside edge of your
bowl and cut holes in the bowl about every 3 inches for heat to escape...
Steve Kramer wrote:
> how big is 2mm - is that like the width of ant?
>
> And is my concern the distance the caliper is from the rim? or is it the
> shape of the ufo in the rim area?
>
> >From what people are saying - it seems these will match up fine to the s6
> wheels which I got for $250.
>
> The specs on the v8 wheels are 15" x 7.5 35 mm.
>
> Now trying to find the elusive 2mm spacers . wondering if some washers
> might do the trich?
>
> Steve Kramer
> 90v8q
>
> ----- Original Message -----
> From: "David Head" <v8q at bellsouth.net>
> To: "Steve Kramer" <skramer at mac.com>
> Sent: Wednesday, May 08, 2002 9:32 AM
> Subject: Re: [V8] V8 s6 wheels
>
> > It'll be close - It depend entirely on the machining in the hub area. My
> Momo Ferrari's
> > are 37mm and clear the UFOs by about 2 mm - I can stcik a memo card in
> between and that's
> > about it!
> >
> > Steve Kramer wrote:
> >
> > > Okay guys I have selected some replacement wheels fr my 1990 V8. A set
> of
> > > S6 wheels from a 1995.5 S6.
> > >
> > > Will these work? 16" x 7.5 with a 37 mm offset. 6 spoke variety.
> > >
> > > thanks
> > >
> > > Steve Kramer
> > >
> > > 1990v8q
> > >
> > > _______________________________________________
> > > Audifans v8 mailing list
> > > Send posts to: mailto:v8 at audifans.com
> > > Unsubscribe or Manage your list options at
> http://www.audifans.com/mailman/listinfo/v8
> >
> >
More information about the quattro
mailing list