[urq] CIS HP - how to measure A/F meter limitations

[Bruce Bell]

I tried this last summer on my stock wk. Used a vacuum gauge with resolution
in Inches. Didn't see a bump on the needle through full throttle and rpm
range. I was motivated by the negative boost article on autospeed, which I
mentioned in an earlier thread. My test certainly wasn't conclusive and I'll
try it again with more sensitive instrumentation.

Bruce

-----Original Message-----
From: urq-admin at audifans.com [mailto:urq-admin at audifans.com]On Behalf Of
JShadzi at aol.com
Sent: Sunday, May 12, 2002 9:15 AM
To: fundsaloracing at yahoo.com; QSHIPQ at aol.com; quattro at audifans.com;
J123fs at aol.com
Cc: urq at audifans.com
Subject: Re: [urq] CIS HP - how to measue A/F meter limitations


--
[ Picked text/plain from multipart/alternative ]
Yes, that would be an interesting data point.
Javad

In a message dated 5/12/2002 7:06:52 AM Pacific Daylight Time,
fundsaloracing at yahoo.com writes:

> Another possiblyetest, I wonder if vacuum gauges would
> be sensitive enough....? Could one could measure the
> relative difference on either side of the A/F meter at
> various RPM/flow rates?
>
> -glen
>
> OOOO
>

_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq