turbo conversions (4kq-mc)

[Jim Green]

--- Eddy Mattice <eddymattice at hotmail.com> wrote:
>
> Can anyone point me in the direction of any sites or
> archives that can help
> with the wiring part of the turbo conversion? I have
> a write up by stott
> hare but I could not find any follow up in the
> archives... Any one able to
> give a simplified connect this to here type
> explanation??

This is probably the one you have.
http://mchang.org/audi/tech/4ktq_wiring.html
BUT, if you are doing this, than you will, if you like
it or not, have to become one with those wiring
diagrams.  If you don't, you will waste so much time
trouble shooting problems that you don't understand
because somebody just told you to hook the blue wire
to the green wire.  Trust me.

> I have the books I
> just hate try to trace through wiring diagrams for
> hour figuring out what to
> connect to where. One other question regarding
> bypass valve installation, I
> am using older intercooler which has no socket for
> int temp sen instead it
> has round hose connection. Can I connect one end of
> bypass here and the
> other to the intake boot??

Yep, that IC works great for the bypass valve.
Ideally, try and get the connection that goes back to
the low pressure side as close to the turbo intake as
possible.  You want to keep that baby spinning!
HTH

=====
Jim Green
'89 90tq EFI
http://www.geocities.com/jeg1976/car_home.html

__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com