HELP - Turbo restrictor

[Marc Swanson]

> I am looking for a turbo restrictor for a K26 to go from the stock 40mm to
> 34mm. I am planning on running my 4ktq in a rally in Canada and a
> restrictor is a requirement.  Does anyone know if anyone makes them or
> worst case a good machine shop in the Southern NH area?
>
> I need to get find one - have one fabricated quickly.

A few solutions come to mind:

1) buy a header-reducer kit from a FLAPS and cut each side so that the ID
matches your desired input/output. You may need to weld on a straight section
on either end for a good hose connection.

2) something from the plumbing section of home depot might be made to work...

3) buy a "transition" from burns stainless (you can get them made in mild
steel == cheaper).

4) buy two sections of pipe, each with the desired ID on either side and weld
together a slip joint.


Later


-Marc-
87 4ktq
88 90q