CV Boot 80q

[John Larson]

If you son't have the tool, a pair of "end cutter" pliers works well.  John
----- Original Message -----
From: "Bhatti, Mohammed" <Mohammed.Bhatti at si-intl.com>
To: "'John Larson '" <j.d.larson at verizon.net>; <quattro at audifans.com>
Sent: Monday, November 04, 2002 11:57 AM
Subject: RE: CV Boot 80q


>
> Ok, so whats the technique to tighten these?  Any special tools reuired?
>
> Thanks John.
>
> mohammed
> 88 80q
>
> -----Original Message-----
> From: John Larson
> To: Mohammed.Bhatti at si-intl.com; quattro at audifans.com
> Sent: 11/4/2002 2:47 PM
> Subject: Re: CV Boot 80q
>
> You don't want to use screw type hose clamps to secure the boots.  Not
> only
> are there clearance issues, but you'll cause an unwanted imbalance,
> however
> minor.  HTH, John
>
>
>