Need some help to make a dicission(buying UrS4)

[Konstantin Bogach]

Thank you Taka.  My back is not going to like it.  I bearly managed to
installed 10V head with both manifolds on it without dropping and
scratching.  Is it difficult to put EM on with the head in place?  On MC
engine it would be hard to tork it properly.

Konstantin.

t44tq at mindspring.com wrote:

> Konstantin-
> The only thing I now is significantly different is the weight of the
> head
> itself- 20v heads are very heavy and large.
>
> Taka
>
> -----Original Message-----
> From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com] On
> Behalf Of Konstantin Bogach
> Sent: Sunday, November 03, 2002 11:42 PM
> To: quattro at audifans.com
> Subject: Need some help to make a dicission(buying UrS4)
>
> I put an offer for UrS4 and now I have double thought.  I need some help
>
> to clear my dobts.
> The car is '93.  It has Bilstein Sport/H&R  setup.  I never had such low
>
> clearance.  There are a lot of people on the list who has this setup.
> Does it create any problem at winter when it snow?
>
> Another thing: oil leak through the head gasket.  Is there any
> significant difference to take the head off and do the valve job on 20V
> head compare to 10V one?  I did this job on 200 '89.   Shall I expect
> problems if I do it alone, with no hoister?
>
> Thank you.
> Konstantin.
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/02
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/02
>