Need some help to make a dicission(buying UrS4)

[Kneale Brownson]

I wouldn't attempt this alone without a lift.

At 08:31 AM 11/05/2002 -0500, Konstantin Bogach wrote:
>Thank you Taka.  My back is not going to like it.  I bearly managed to
>installed 10V head with both manifolds on it without dropping and
>scratching.  Is it difficult to put EM on with the head in place?  On MC
>engine it would be hard to tork it properly.
>
>Konstantin.
>
>t44tq at mindspring.com wrote:
>
> > Konstantin-
> > The only thing I now is significantly different is the weight of the
> > head
> > itself- 20v heads are very heavy and large.
> >
> > Taka
> >
> > -----Original Message-----
> > From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com] On
> > Behalf Of Konstantin Bogach
> > Sent: Sunday, November 03, 2002 11:42 PM
> > To: quattro at audifans.com
> > Subject: Need some help to make a dicission(buying UrS4)
> >
> > I put an offer for UrS4 and now I have double thought.  I need some help
> >
> > to clear my dobts.
> > The car is '93.  It has Bilstein Sport/H&R  setup.  I never had such low
> >
> > clearance.  There are a lot of people on the list who has this setup.
> > Does it create any problem at winter when it snow?
> >
> > Another thing: oil leak through the head gasket.  Is there any
> > significant difference to take the head off and do the valve job on 20V
> > head compare to 10V one?  I did this job on 200 '89.   Shall I expect
> > problems if I do it alone, with no hoister?
> >
> > Thank you.
> > Konstantin.
> >
> > ---
> > Incoming mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/02
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/02
> >