Fuel injector removal tool

[passat TS]

[ Converted text/html to text/plain ]

Craig,

I must have a problem. I do have a Zelenda Catalog at work!!!

Tool #  US1123-4

However, this type of tool can be found in other places, and probably cheaper.

Try Adirondack or TPC.

Snap On also have it (MAC, etc. probably too). So, you can stop a truck and
get it or go to snapon.com.

Snap On Part Number: YA8340

Good luck,

Carlos.

ps. If you're going to replace the seals, put some lube to help you out.
>From: "Craig D. Niederst"
>To: "Quattro List"
>Subject: Fuel injector removal tool
>Date: Sun, 6 Oct 2002 13:50:18 -0400
>
>I tried to remove the fuel injectors in my '86 CGT yesterday without
>success. Just pulling by hand did not work, so I made a copy of the Audi
>injector removal tool out of a piece of angle iron with a notch cut in it.
>Still no luck (and I bent the angle iron!). Does anyone have the Audi/VW
>part # for the injector removal tool? I looked through the Zelenda website,
>and could not find it.
>
>Craig
>'92 100S (100k)
>'86 CGT (217k)

------------------------------------------------------------------------------
Send and receive Hotmail on your mobile device: Click Here[1]

===References:===
  1. http://g.msn.com/1HM1ENUS/c152??PI=44364