Fuel injector removal tool

[Craig D. Niederst]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
Thanks to all who replied. Tool is $20 shipped from Zelenda. From what other listers have shared on how they were able to remove their injectors, I just hope it works!

Craig
'92 100S (100k)
'86 CGT (217k)
  ----- Original Message -----
  From: passat TS
  To: niederst at pghmail.com ; quattro at audifans.com
  Sent: Monday, October 07, 2002 8:44 AM
  Subject: Re: Fuel injector removal tool


  Craig,

  I must have a problem. I do have a Zelenda Catalog at work!!!

  Tool #  US1123-4

  However, this type of tool can be found in other places, and probably cheaper.

  Try Adirondack or TPC.

  Snap On also have it (MAC, etc. probably too). So, you can stop a truck and get it or go to snapon.com.

  Snap On Part Number: YA8340

  Good luck,

  Carlos.

  ps. If you're going to replace the seals, put some lube to help you out.



  >From: "Craig D. Niederst"
  >To: "Quattro List"
  >Subject: Fuel injector removal tool
  >Date: Sun, 6 Oct 2002 13:50:18 -0400
  >
  >I tried to remove the fuel injectors in my '86 CGT yesterday without
  >success. Just pulling by hand did not work, so I made a copy of the Audi
  >injector removal tool out of a piece of angle iron with a notch cut in it.
  >Still no luck (and I bent the angle iron!). Does anyone have the Audi/VW
  >part # for the injector removal tool? I looked through the Zelenda website,
  >and could not find it.
  >
  >Craig
  >'92 100S (100k)
  >'86 CGT (217k)


------------------------------------------------------------------------------
  Send and receive Hotmail on your mobile device: Click Here

--