pump to rack hose (Type 44)

[Wallace White]

FWIW, I too had this hose rebuilt, reusing the ends and the restrictor.
It wound up costing $60, it did make some noise, and it split apart at
one of the junctions a few months later.

A quiet, new OEM hose was ~$90 from Carlsen.

I know many have had great success with rebuilt hoses, but it does
depend on the quality of the work done.

- Wallace
   '87 5kcstq 191k


DAK wrote:
> James,
> The noise on the hose is just not there! The guy (Dick) was able to
> retain the resonator. I think it is at least as quiet as before. The
> original ends were used. New crimps and rubber were used. The new hose
> is rated to 4800 PSI. (Much higher than the 2000 PSI working pressure of
> the system). I can e-mail you pictures. If you have a speedy connection,
> they won't be a problem.