E-Brake Cable Adjust on 5KCSTQ?

Tue Oct 15 07:29:00 EDT 2002

Hi,
	I installed new rotors and pads on my 88 5000 CS TQ and now my
E-Brake lever will only pull up 1 click. When it's off there is barely
enough cable slack at the wheels to avoid drag. Bently says there should
be just barely hand-turnable rear wheels with lever at click 3. Their
adjust instructions show luxurious access to the adjustment nut on the
lever rod. BUT my reality is that it looks like the driveshaft was not
present in their picture. Are there some tricks you guys know to get at
the adjustment nut, mine is a bit rusty to boot? Thanks for any
suggestions of special tools etc.

Lou