NA 2.5l 10v engine infos

[Mihnea Cotet]

Gang,


I got this from a friend in Germany who's a quite
reputable tuner...

In order to make a 2.5l 10v engine you will need the
following parts:

-stock 2.2l 10v NA engine block
-south african 2.5l TDI engine crankshaft
-Golf GTI 16V mk3 rods and pistons.

I guess the block would have to be rebored to 82.5mm
(if the 2.0 engine has 82.5mm bore, not sure of that
for the moment) and that would give a 2.5l engine...
Dunno the CR yet but I think it must be acceptable....

At least with this setup there would be no TB length
issues as when using the whole 2.5l gas block out of
an eurovan...


Mihnea

__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com